How To Replace USD Fork Oil Seals : KTM Duke/RC 125/200/250/390 - ktm duke 200 fork oil capacity 27.24 Ktm 200 & 390 frok oil leak problem Changing new oil seal & cone set bearing - ktm duke 200 fork oil capacity KTM Duke 125 Weight & Height. The seat height of KTM Duke 125 is 818 mm and the kerb weight is 159 kg. In other dimensions Duke 125 has 1993 mm Length, 789 mm Width, 1083 mm Height, 1366 mm Wheelbase, 175 mm Ground Clearance, 13.5 Litres Fuel Tank Capacity. SUPER DUKE 125: SYM: SUPER DUKE 150: SYM: UMotorex is the OEM engine oil for KTM and a recommended oil by many motorcycle manufacturers. Promotes a high level 4) Push fresh fluid with syringe. 5) when reservoir gets almost full, suck out the fluid again to nearly empty. 6) Push more fluid with syringe. 7) repeat steps 5-6 as often as necessary until fluid is clear and no longer discoloured (only took me two reservoir drains total) 8) Push fluid till reservoir is full. Done. Low Oil Pressure Problem : r/KTMDuke. Hi guys, i have a D390 2013 and a few months ago (~4) i had a warning light about Low oil pressure. It came up in every ride and stayed on. I went to my KTM mechanic and at first we changed the oil pressure sensor but the issue remained! Then we did an oil and oil filter change and the problem was fixed! I have had the oil pressure sensor swapped for the new revision and the latest ecu software applied which has fixed the oil warning light not turning off on hot start issue. However the oil light now sometimes comes on when taking off from a stand still. The conditions seem to be: - Taking off from a stand still, with revs around 3000rpm The 890 Duke R is is a bit more powerful than the non R versions. And the suspension is not only better, but, crucially, it’s fully adjustable. Your skills level would need to be through the roof to outride this bike on track. Can’t say the same for the non R. Tuzakk500 • 1 yr. ago. oQVm4.

ktm duke 125 oil level